Skip to main content

ISO 9001 · 14001 · 45001 certified hot melt adhesive manufacturer since 1996

Zhejiang Good Adhesive Co., Ltd — Est. 1996

About Good Adhesive

A hot melt adhesive manufacturer built on a state chemical research institute background. Three production bases, 50,000 tons of annual capacity and a dedicated R&D center, supplying manufacturers in 60+ countries.

Sourcing Formulation Production Monitoring Testing Outbound
1996 Founded
3 Production Bases
50,000 Tons Annual Capacity
56 Patents
60+ Countries Served
11 Production Lines
Our Story

From a Research Institute to Three Production Bases

Zhejiang Good Adhesive Co., Ltd was founded in 1996 on a state chemical research institute background, and formulation has stayed at the center of the business ever since.

Today the company runs three production bases across China with 11 production lines and 50,000 tons of annual capacity, backed by a dedicated R&D center and more than 20 in-house testing instruments.

The range covers EVA, APAO, HMPSA, PUR, PA, PES, TPU and gelatin-based adhesives, supplied as block, granule, flake, stick, powder and film for paper, packaging, hygiene, construction, woodworking, textile and footwear lines.

Hot melt adhesive block production line at the Good Adhesive factory
1996 Established in Zhejiang
What Sets Us Apart

A Formulation Partner, Not a Catalog Order

Every order starts from the substrate, the line speed and the climate the product ships into.

Custom Formulation

Adhesive engineered to the substrate, the line speed and the climate it ships into, not a fixed off-the-shelf blend.

Full Form Range

Block, granule, flake, stick, powder and film produced off the same formulation base.

Factory-Direct Supply

Three production bases across China, 50,000 tons of annual capacity, exporting to 60+ countries since 1996.

Technical Support

Formulation adjustment and on-site trial support backed by more than 20 in-house testing instruments.

Inside Our Plant

Where Every Formulation Is Made and Tested

Production and quality control under one roof, from the reactor to the finished form.

Quality Control

Hot Melt Adhesive Testing in Our Own Laboratory

Our R&D center and quality control laboratory work alongside production. Formulations are developed, adjusted and checked here before they reach your line.

Melt viscosity, flow behaviour and sample testing are part of our routine checks, supported by more than 20 in-house testing instruments.

  • Melt viscosity and flow testing
  • Sample checks on raw materials and finished grades
  • Formulation trials matched to your substrate
R&D laboratory testing of hot melt adhesive granules at Good Adhesive
R&D testing
Technician working in the Good Adhesive hot melt adhesive quality control laboratory
QC laboratory
Melt viscosity testing of yellow hot melt adhesive granules in the Good Adhesive laboratory
Melt viscosity
Viscosity test of hot melt adhesive in the Good Adhesive laboratory
Viscosity test

Warehousing

Raw Material and Finished Goods Warehouses

Raw materials are received and stored on racked pallets in their own warehouse. Finished hot melt adhesive is packed, palletized and held in stock, so repeat orders and export shipments can be prepared quickly.

Raw materials stored on racked pallets in the Good Adhesive warehouse

Raw Material Warehouse

Bagged raw materials stored on labelled, racked pallets before production.

Finished hot melt adhesive inventory on racked pallets ready to ship

Finished Goods Warehouse

Packed hot melt adhesive held in stock on racked pallets.

Hot melt adhesive finished goods warehouse with racked pallets at Good Adhesive

Stock Ready for Export

Palletized orders prepared for shipment to customers in 60+ countries.

Our People

The Team Behind Every Order

Our office team handles inquiries, samples and export documents, and works closely with the laboratory and production. Visiting customers are welcome in our showroom.

Good Adhesive office and export team at work

Office & Export Team

Inquiries, quotations, samples and shipping documents handled in one office.

Good Adhesive showroom with the Cross-Strait Adhesive Dialogue feature wall

Showroom

Where we welcome customers and partners who visit the plant.

Staff canteen at the Good Adhesive hot melt adhesive factory

Staff Canteen

A clean, bright canteen for the people who make and test our adhesives.

Exhibitions

Where You Can Meet Us

We exhibit at the China Adhesives and Sealants Expo in Shanghai, booth E1468. It is where customers see our hot melt adhesive grades side by side, take samples away and talk a line through with our engineers.

Good Adhesive booth E1468 at the China Adhesives and Sealants Expo in Shanghai

Booth E1468, Shanghai

Our stand at the China Adhesives and Sealants Expo, with EVA, APAO, PUR and pressure sensitive grades on display.

Good Adhesive sales and technical team at booth E1468, China Adhesives and Sealants Expo

The Team on the Stand

Sales and technical staff are there for the full show, ready to go through substrates, line speeds and grades with you.

Good Adhesive staff meeting overseas customers at the adhesives expo in Shanghai

Meeting Customers Face to Face

Buyers and partners from China and overseas visit the stand to review samples and plan trials on their own lines.

Quality & Certifications

Certified Systems, Third-Party Tested Products

ISO-certified management systems, with products tested by independent laboratories against EU and Chinese regulations.

ISO 9001:2015 quality management system certificate of Zhejiang Good Adhesive Co., Ltd.
Management System

ISO 9001

Quality management system for the R&D and production of eco-friendly hot melt adhesives.

ISO 9001:2015 · Valid to 2027
ISO 14001:2015 environmental management system certificate of Zhejiang Good Adhesive Co., Ltd.
Management System

ISO 14001

Environmental management system across hot melt adhesive R&D and production.

ISO 14001:2015 · Valid to 2027
ISO 45001:2018 occupational health and safety management system certificate of Zhejiang Good Adhesive Co., Ltd.
Management System

ISO 45001

Occupational health and safety management system for plant operations.

ISO 45001:2018 · Valid to 2027
China Environmental Labelling product certificate for Good Adhesive bookbinding adhesives
Eco Label

China Environmental Label

Ten-Ring environmental labelling certification for bookbinding adhesives.

China Environmental Labelling · 2026
SGS test report screening Good Adhesive hot melt adhesive against 253 REACH SVHC substances
EU Chemicals

REACH

SVHC screening against 253 substances, covering the full granule range.

SGS · 2026 report
RoHS 2.0 (Directive 2011/65/EU) test report for YD-5100 hot melt adhesive, issued by EMTEK
EU Chemicals

RoHS 2.0

Restricted substances testing to Directive 2011/65/EU (RoHS) and its amendments.

EMTEK · 2025 report
EU PPWR packaging compliance test report for Good Adhesive hot melt adhesive, issued by EMTEK
EU Packaging

PPWR (EU) 2025/40

Compliance with the EU Packaging and Packaging Waste Regulation for block adhesives.

PPWR · 2026 report
Volatile organic compounds (VOCs) test report for Good Adhesive hot melt adhesive, issued by EMTEK
VOC

GB 33372-2020

Volatile organic compound (VOC) testing against the Chinese national limit standard for adhesives.

EMTEK · 2025 report
Phthalates test report for 8AB hot melt adhesive, issued by EMTEK
Restricted Substances

Phthalates (6P)

Six-phthalate screening to GB/T 22048-2015.

EMTEK · 2026 report

Certificates and full English test reports are available on request.

Request Copies
Industries We Serve

Bonding Across 13 Industries

From carton sealing lines to hygiene, footwear and filtration, the same formulation discipline applies.

Paper, Print & Bookbinding
Packaging & Labels
Food & Beverage
Hygiene, Nonwoven & Medical
Construction & Roofing
Woodworking & Furniture
Textile
Footwear
Filtration
Mattress & Bedding
Industrial Assembly
Insect Control
Craft & Gift
Contact

Visit or Reach the Export Team

Telephone +86-573-8884-9653

Mon–Fri, 9:30–17:30 China Time (GMT+8)

Fax

+86-573-8862-3901

Address

No.99 Nanhui Road, Heshan Industrial Park, Tongxiang City, Zhejiang, China

Get Started

Send Your Substrate. Get a Formulation Built for It.

Share the material, the line speed and the climate the product ships into, and a sample and technical data sheet follow.

Chat on WhatsApp
Free Sample · Technical Data Sheet

Request a Sample

Share the material, the line speed and the climate your product ships into. A sample and a technical data sheet follow from our export team.

Formulated to your substrate and line speed

Block, granule, flake, stick, powder or film

Factory-direct from Zhejiang to 60+ countries

Prefer to talk? WhatsApp +86 139 6713 4045 Tel +86-573-8884-9653

Phone: Mon–Fri, 9:30–17:30 China Time (GMT+8)

info@goodadhesive.com

Tell Us About Your Application

Fields marked * are required.